中厚度圆浮板自由振动的一个解析解

本文提出了常水深环境下中厚度圆浮板自由振动的一个解析解.分析中考虑了板横向剪切变形的影响和横截面转动惯性效应,利用空气中中厚度圆板的振型叠加和势流理论,导得了浮板系统频率方程的解析式.由此可看出Y.Tanaka得到的圆形薄浮板的解是本文的特例.最后数值计算还给出了水深和钢缆刚度与频率的关系曲线.并指出了h/a在什么范围可以略去剪切变形和转动惯量的影响.     

结构随机激励的响应灵敏度分析

本文建立了有色噪声随机激励的响应协方差矩阵方程,推导了响应灵敏度的计算式,给出了进行灵敏度计算的方法,并作了实例计算。     

高速电梯系统时变动力学模型与分析

以往关于电梯系统的研究指出，引起电梯系统振动的主要原因在于外部激励－由曳引机，承重装置，拖动和控制系统等引起。这是基于经典的结构共振理论得出的结论，但不能解释某些电梯的振动行为。本文从时变结构力学的观点出发，计及电梯曳引钢丝绳的长度随时间变化，建立起电梯系统的变刚度动力学模型，采用解析方法给出了高速电梯弹性振动的位移和加速度响应表达式。从理论上证明作为时变系统的电梯，具有振荡运动的特征，存在由变刚度引起的自激振动。进一步研究表明，电梯提速意味着曳引钢丝绳的初始扰动增大，导致电梯振动的加速度也增大，对电梯的舒适性有负面影响。     

复合随机振动分析的扩阶系统方法

提出了随机结构系统反应的子空间次序正交分解的思想．基于这一思想，文中导出了一类用于考虑随机激励的随机结构复合随机振动分析的扩阶系统方法，从而可以应用传统的确定性结构随机振动各种分析方法求解复合随机振动问题．作为特例，本文给出了使用模态分析法求解的过程．将文中算例与随机模拟结果相比较，证实了本文思想与方法的实用性．     

Creep—Slip Capture as a Possible Source of Squeal During Decelerated Sliding

Friction-induced vibration of a two-degree-of-freedom mass-damper-spring system interacting with a decelerating rigid strip is investigated. The friction law is approximated by an analytical function to facilitate the analyses and numerical integrations. It is shown that, after a quasi-harmonic transient period, accompanied by viscous energy dissipation, a short period of intensive ‘creep-slip’ vibration occurs, which generates a series of ‘micro-impacts’ on the strip. Because of the impulsive character of such kind of loading, its Fourier spectrum is rich and quite broadband. Using an averaging technique, the ‘normal form’ equations of motion show that the out-of-phase vibration mode absorbs more energy from the decelerating strip when its natural frequency satisfies certain resonance conditions. The study is then applied to an automotive disc brake model to gain useful insight into the generation of squeal. It is shown that the out-of-phase creep-slip vibration (in the longitudinal direction) of the brake pads generates an impulsive bending moment on the decelerating strip (disc rotor). This impulsive load may be considered as a possible source for brake squeal. The technique developed in this paper may be extended to other ‘squealing systems’ including models for geophysical faults (earthquakes).     

Numerical path integration of a non-homogeneous Markov process

The numerical path integration method, based on Gauss-Legendre integration scheme, is applied to a Duffing oscillator subject to both sinusoidal and white noise excitations. The response of the system is a Markov process with one of the drift coefficients being periodic. It is a non-homogeneous Markov process that does not have a stationary probability distribution. When applying the numerical procedure, the values of transition probability density at the Gaussian-Legendre quadrature points need only be calculated for time steps of the first period of the sinusoidal excitation, and they can be saved for use in all subsequent periods. The numerical procedure is capable of capturing the evolution of the probability density from an initial distribution to one that is changing and rotating periodically in the phase space.     

Control of a Nonlinear System Using the Saturation Phenomenon

In this paper, a theoretical investigation of nonlinear vibrations of a 2 degrees of freedom system when subjected to saturation is studied. The method has been especially applied to a system that consists of a DC motor with a nonlinear controller and a harmonic forcing voltage. Approximate solutions are sought using the method of multiple scales. It is shown that the closed-loop system exhibits different response regimes. The nature and stability of these regimes are studied and the stability boundaries are obtained. The effects of the initial conditions on the response of the system have also been investigated. Furthermore, the second-order solution is presented and the corresponding results are compared with those of the first-order solution. It is shown that by increasing the amplitude of the excitation voltage, the higher-order term in the solution becomes significant and causes a drift in the response. In order to verify the obtained theoretical results, they are compared with the corresponding numerical results. Good agreement between the two sets of results is observed.     

不同耗能器安装方式下的结构振动控制效果分析

在斜支撑和Ⅴ形支撑的基础上，提出了安装阻尼器的三种新型附加联动机构支撑形式；并对这三种支撑形式下的阻尼器行程和控制力的计算进行了分析，采用放大系数的形式使计算公式得以简化；以SMA耗能阻尼器为对象，利用笔者编写的计算机程序，对包括斜支撑和Ⅴ形支撑在内的五种阻尼器安装方式进行了仿真计算。结果表明：(1)不同安装方式的振动控制效果各不相同，上肢联动机构的放大作用最大；(2)SMA耗能阻尼器的控制效果受SMA丝材长度的影响较大；(3)对不同的结构和不同的阻尼器应选择不同的阻尼器安装方式，才能使整体控制效果达到最佳。     

载流曲管声—弹耦合振动高阶模态的稳定性及其能量分布

讨论了载流曲管声－弹耦合振动的高阶模态及其稳定性，研究结果表明系统的耦合振动与流体和结构之间的刚性比α，截面特性比γ及质量比β有直接关系。α和γ的乘积ζ是系统特征值及稳定性的重要影响参数。文中给出了两端固支载流曲管前三阶失稳频率所对应的ζ。为了更好地解释耦合系统的振动特性及稳定性，还研究了曲管声－弹耦合振动的能量分布     

汽轮发电机定子结构的动力分析和模型试验研究

本文用有限元方法分析了两种常见汽轮发电机定子结构模型的动力特性,建立了固有特性对集中质量、连接刚度及基础刚度的灵敏度分析方法,对这两种结构模型进行了振动实验研究,实验结果与有限元分析结果吻合较好.从避开共振的角度出发,对两种结构作了评价.本文的研究方法及实验结果对汽轮发电机结构设计、减振、隔振和降噪等方面的工作具有一定的参考价值和实际工程意义.